honda odyssey oil life reset 2008

Release it and hold it again for 5 seconds. The maintenance item codes will disappear and the engine oil life will reset to 100.

New 2022 Honda Odyssey Touring Mini Van Passenger In Des Moines D5f066546 Smart Honda

Select Oil Life display by pressing the SELRESET knob.

. 3Press the SELRESET button on the steering wheel for about 10 seconds. B full oil change with filter and multiple other checks. Use the trip button to select oil life.

Press the SELRESET button on the steering wheel. Release the button when CUSTOM SETUP appears. You only need to know how to do this if you perform your own Honda oil changes.

1 Rotate tires. The oil life will resets to 100 and no more amber light. The engine oil life indicator and the maintenance item code s will blink.

The oil life percentage will begin to blink and bring you to reset mode. Press the selectreset knob until the engine oil life indicator is displayed. Then with that little button that I just pressed on there were going to hold that down for 10 seconds.

Turn the ignition to run one position before starting engine. Honda odyssey oil life reset 2008 Sunday May 15 2022 Edit Press the SELRESET button on the steering wheel until you see the engine oil life display. How to change back light embly on a honda odyssey 2005 2008 reset service oil life maintenance.

I want to change it to synthetic but I am not sure about the intervals. When the code disappears release the stem. 2008 HONDA Odyssey Maintenance Light Reset Instructions.

Honda Odyssey Check Engine Light Vsa Oil Preasure Flashing Codes P2647 P2646 You. Once the display shows Engine Oil Life you want to push the Info Button to enter Reset Mode. Press and hold the SELRESET stem again for about 5 seconds.

Press the SELECTRESET knob for more than 10 seconds the indicator and the maintenance codes will blink. 2008 Honda Odyssey EX-L. Press and hold the SELRESET button until you see the CUSTOM SETUP display.

Toggle the SELRESET button to display the Oil Life if its not displayed already. After you enter Reset mode you can once again push the SelectReset button and the engine oil life should return to 100 indicating that you just had an oil change. Once you see oil life press and hold the trip button for 10 seconds.

Select the maintenance item to reset or select All Due Items. Turn the ignition switch to the ON II position. The display will change to the CUSTOM SETUP mode.

3 Replace Transmission fluid. Press the selectreset knob until the engine oil life indicator is displayed. How to reset the oil life on 2008 Honda Odyssey same thing as maintenance light.

While the Oil Life is displayed press and hold the SELRESET stem for 10 seconds. Locate the trip button on the lower right side of your instrument cluster. Now what you should do is hold down the ENTER button for about ten seconds to enter the reset mode.

The engine oil life indicator and the maintenance code s will blink. Just follow these steps. Press and hold the ENTER button.

The maintenance items codes will disappear and the engine oil life indicator will reset to 100. Press the selectreset knob for more than 5 seconds. Turn the ignition to the run position.

Press and hold the SELRESET knob in the instrument panel for about 10 seconds. The vehicle has always taken 5W-20 conventional oil and has been religiously changed at 40 oil life. The Maintenance Minder for oil life percentage is simply a counter of miles since the last time the minder was reset - supposedly when the.

Next go to the OIL LIFE with the down arrow button and hit Enter then its gonna show you the remaining oil life. Press the SELECT RESET knob for 5 more seconds the maintenance codes will disappear and oil life will be reset to 100. Release then press and hold the SELRESET knob for another 5 seconds.

If playback doesnt begin shortly try restarting your device. The oil life display should now read 100 and any maintenance codes are no longer displayed. Press and hold the SelectReset knob.

Press the SELRESET button on the steering wheel for about 10 seconds. Press the SELRESET button on the steering wheel until you see the engine oil life display. Here are what the maintenance codes mean.

Press the selectreset knob for about 10 seconds. Press the selectreset knob for more than 5 seconds. The engine oil life indicator and the maintenance item codes will blink.

2008 Honda Odyssey Oil Life Reset 2005-2010. Press the SELECTRESET knob for more than 10 seconds. You might have to press the button three or four times.

Press the selectreset knob for about 10 seconds. Press the SELECTRESET knob until the engine life indicator is displayed. Turn your key to the accessories position.

How to reset the oil life on 2008 Honda Odyssey same thing as maintenance light. Press and release the SELRESET button one more time to reset the indicator. The maintenance item code s will disappear and the engine oil life will reset to 100.

Turn the ignition back to the on position while holding the reset button. The engine oil life indicator and the maintenance item code s will blink. Turn the ignition off.

When the screen blinks release the button. Press the SELECTRESET knob repeatedly until the engine oil life indicator is displayed. Press the SELECTRESET knob for more than 10 seconds.

You can look this up in your maintenance record book - each page has a check box with the different codes and what service each code represents. I just changed the oil on this honda odyssey touring version so lets go inside and do the oil life reset.

New 2022 Honda Odyssey Ex L For Sale In Colma Ca Stock Nb037362